Rubber welting for Wheeled Coach fenderettes, priced per foot. (Typically requires 6 feet per fenderette). This product goes between the fenderette and the mounting surface to prohibit corrosion.

Rubber spacer typically used on Wheeled Coach rubrails.

Plastic Return Air Grille, 12.38" x 2.75", Black

Plastic Return Air Grille, 12.38" x 5.51", Black

Plastic Return Air Grille, 6.19" x 5.51", Black

Rectangular Courtesy light for License plate. LED

Rubber Fenderette material. 2.25" H x 2.25" W x 3/16" thick. Can be shaped to fit any contour. **SOLD PER FOOT.

It typically takes 6ft per fender.

4" Round Louvered Vent Cover. Stainless Steel. (4) mounting holes

Round courtesy light for license plate. LED

Rubber Dock Bumper, measures 16" L x 2.5" W x 2" H. (3) 1/2" mounting holes on 6.5" centers

Corner bracket designed for Ford E-series vans, used to mount door grabber assemblies to the corner of the vehicle.

Perko Chromve Vent Cover. Black mounting base has (4) mounting holes

Cast aluminum vent cover w/ (2) #10 mounting holes, Polished. Measures 8.75" wide x 4" tall

Cast aluminum vent cover, typically used on Wheeled Coach ambulances

Attwood Cowl vent, surface mount, stainless w/ black mounting base. Base has (3) mounting holes

Cast Aluminum Fuel filler guard, 22 degree, 7.56" x 7.56", 2.25" diameter hole

White Vent Cover. Typically used on McCoy-Miller ambulances

Air Inlet Vent, measures 6.25" x 7.25". Has (3) flaps that allow air to vent. Typically used in Braun ambulances.

Urea Fill Guard, Cast Aluminum. 5.7" x 5.7" wide x 2.84" deep, 45 degree.

Black siren speaker cone for Wheeled Coach ambulances. Inside of the cone is threaded to screw onto a siren speaker driver. SOLD INDIVIDUALLY.

Attwood Turbo 3000 3" Blower Fan

Cast Aluminum Fuel Filler Guard. 53 degree, 8.08" x 7.98", 2.5" diameter hole

Cast Aluminum license plate holder with (2) LED courtesy lights. 14" x 8", Polished. Has (2) LED lights installed for license plate illumination, 12VDC.

White plastic vent cover for Wheeled Coach ambulances. Outside flange measurements are 8.625" x 7.125", vent measurements are 7" x 6.25"

Stainless Fender Flare (Fenderette). Measures 36.125" OD x 17.375" tall. Typically used on Medix Ambulances

White plastic vent cover for Wheeled Coach ambulances. Outside flange measurements: 7.125" x 6.875", Vent opening measurements: 4.5" x 5.5"

Aluminum Fenderette typically used on Braun ambulances. Overall measurements are 38.5" wide x 20.375" tall x 1" deep

Stainless Federette, 35" OD x 17.5" Tall. Often used on McCoy-Miller and Osage ambulances

Stationary Side Step. Can be used under side entry door

Aluminum fenderette designed to work on Type I or Type III AEV Ambulances. It is made longer than needed so it will fit both applications. The fenderette measures 38.75" OD x 25.75" tall. (please note the height can be cut down)

Stainless Fenderette, Typically used on Medix ambulance (2012-Up). Outside measurements are 36" wide x 19" tall

For Medix ambulances built before 2012, use part # AH-TH4035

Thin 100 watt speaker driver without threaded neck. (replaces part # KS-100-N)

Thin 100 watt speaker driver with threaded neck (replaces part # KS-100)

Cast Aluminum Fenderette, 37" OD x 18.25", Polished. Comes with rubber welting already mounted. Often used on McCoy-Miller ambulances.

Cast Aluminum fenderette w/ flat top. 36.375" wide x 18" tall

Whelen 100W speaker w/ composite housing. Manufactured in America!

Cast Aluminum fenderette, 3 piece, which allows for slight adjusting. 38.84" OD x 17.84" tall

12" x 12" inter-locking tiles. Sold in 3' x 12' rolls. Self-draining floor system is manufactured from sturdy Oxy-B1 vinyl. Easy-to-install interlocking tiles adapt to fit any floor shape and its patented design lifts you above wet floors. UV stabilized and guaranteed to control the spread of bacteria and fungus for 10 full years. To clean simply roll up flooring and hose off.

*Available in other colors. Please call 931-684-8964 with questions.

Stainless Fenderette, 36.375" OD x 18.25" tall. Often used on Med-Tec & Marque ambulances

Wheeled Coach aluminum fenderette. 39.875" OD x 19.75" tall. (Wheeled Coach recommends installing the rubber welting (PN# WC TR19029) behind the fenderette)

Ziamatic Step Control Module - InPower # IMC-01-SPC326.
Replaces part # 3094-005-195

Thru-the-Bumper siren speaker for the '06-Up GMC/Chevrolet G3500/G4500 Express Vans. Fits driver or passenger side.

Thru-the-bumper mount siren speaker for '07-Up Chevrolet Express Van. Fits either driver or passenger side

'99-'04 F-Series Through Bumper Compact Speaker, Driverside, Polished Cast aluminum housing w/ 100W speaker

'99-'04 F-Series Through Bumper Compact Spkr, Passenger Side, Polished Cast Aluminum Housing. PICTURE SHOWS DRIVERSIDE.

Thru-the-Bumper siren speaker & housing for the 2011-2016 Ford F-series. Passenger side. 100W speaker included

Thru-the-Bumper siren speaker & housing for the 2011-2016 Ford F-series. Driver side. 100W speaker included

Thru-the-Bumper speaker & housing for a 2011-2014 Chevrolet C3500 truck. Driver-Side

Thru-the-Bumper speaker & housing for a 2011-2014 Chevrolet C3500 truck. Passenger-Side

'08-Up Ford E-Series Through Bumper Speaker, Driverside. Comes with 100W siren speaker installed

'08-Up Ford E-Series Through Bumper Speaker, Passenger Side. Comes with 100W siren speaker installed

Thru-bumper speaker for 2015-Up Chevrolet C3500 truck, Driver Side. 100W speaker

Thru-bumper speaker for 2015-Up Chevrolet C3500 truck, Passenger Side. 100W speaker

Thru-bumper speaker for 2017-2019 Ford F-series truck, Passenger Side. 100W speaker

Thru-bumper speaker for 2017-2019 Ford F-series truck, Driver Side. 100W speaker

Thru-bumper speaker for 2020-2022 Ford F-series truck, Passenger Side. 100W speaker

Thru-bumper speaker for 2020-2022 Ford F-series truck, Driver Side. 100W speaker

'05-'07 F-series Through Bumper Speaker, Driverside, Polished Cast Aluminum housing

'05-'07 F-series Through Bumper Speaker, Passenger Side, Polished Cast Aluminum Housing. PICTURE SHOWN IS OF DRIVERSIDE.

'08-'09 F-Series Through Bumper Speaker, Driver Side, Polished Cast Aluminum Housing

'08 F-Series Through Bumper Speaker, Passenger Side, Polished Cast Aluminum housing

Features:
– Shorter drop height than VS-24-11 – ideal for ambulances
– Powered by a 12v electric actuator with a patented in-line locking mechanism to hold step rigidly in place
– Step may be wired to the door interlock system to automatically extend when door is opened and retract when door is closed
– May be retrofitted onto existing apparatus
– Low maintenance
– Made from high-strength aluminum alloy and steel for maximum durability
– Powder-coated and plated for corrosion resistance
– Step stops when sensing resistance/obstacles in its path, resulting in improved property damage prevention and reduced risk of injury

Specs:
– 24″W x 8-3/8″D non-skid stepping surface
– 7-5/8″ drop distance
– Sustains a static load of 500 lb.
– Meets NFPA requirements for slip resistance and static load

Now standard with a self-contained, solid state, polarity-reversing motor controller! Eliminates need for a complex circuit and makes step installation more “Plug and Play.”